|THE ONLY THING "LITE" IS THE PRICE!|
A few Discovery lite customers in 2015 complained about interference on their radios that badly affected certain frequencies. This issue has been resolved from firmware A 220.127.116.11. or higher . The latest version is available as a free download from the manufacturer's website HERE and it is very simple to install. All units, including used or ex-demo stock, are sold with the latest MGL firmware and a full satisfaction or your money back guarantee - see our terms and conditions.
Discovery lite, Explorer lite and Challenger lite
Discovery Lite £2100.00 inc vat (£1750 without vat)
Explorer Lite £2300 inc vat (£1917 without vat)
Challenger Lite £2995 inc vat (£2496 without vat)
- instrument only - see below for special package deals.
The complete self-contained iEFIS
AHRS solid state gyros inside - no extra cost.
All flight instruments.
Connect to PilotAware for traffic display.
Full EMS engine monitoring, just add an RDAC-XF (£250)
or RDAC-XF-MAP (£299) (manifold Pressure model)
No iBOX required with "lite" models
SPECIAL PACKAGE DEALS
Discovery Lite + RDAC-XF-MAP = £2299 including vat
Discovery Lite + RDAC-XF = £2250 including vat
Explorer Lite + RDAC-XF-MAP = £2499 including vat
Explorer Lite + RDAC-XF = £2450 including vat
Add an SP-6 compass module, normally £190, for just £179, saving an extra £11
Up to two "Lite” panels can be used in a single system and they can share RS232 ports and CAN bus devices.
A typical comprehensive functionality "Lite” panel may consist of:
A) One or two EFIS panels
B) One RDAC for engine monitoring plus probes as needed
C) One SP-6 compass
Add to this:
D) One, two or three autopilot servos
E) SP-10 Flap and Trim controller
Also consider the large available range of peripherals from MGL and third parties ranging from VHF radios, navigation radios, transponders, electronic circuit breakers and more.
iEFIS Explorer lite 8.5" and iEFIS Discovery lite 7"
iEFIS "Lite" range |
The stand-alone iEFIS, with built-in AHRS.
The Discovery has a bright non-reflective 7" touch screen of around 1000+ nits. The Explorer has a similar 8.5" touch screen. The Challenger's touch screen is 10.4".
They all look, feel and think like an iEFIS. They have the iEFIS G3 CPU and they run the exact same firmware as the full iEFIS system (in other words they use the same binary and sources).
The Discovery looses a rotary control and the 12 buttons under the display which are now a fixture of the touch screen on the left side. The Explorer lite and Challenger lite retain the buttons and knobs.
All gain a built in GPS, AHRS with gyros and accelerometers, airspeed pressure sensor as well as altimeter. They connect to peripherals via a CAN bus as well as two RS232 ports.
So, considering the above, we can say the "lite" can do anything a full iEFIS can, subject to having fewer hardware interfaces - but because of that there is no need for a separate iBOX.
The CAN bus supports anything we have - Autopilot servos, engine monitoring modules, flap and trim controller, tranponders, compass, etc.
You can also connect an external AHRS if you like and you get RS232 ports for radios, ADSB etc.
There is a small expansion module - if needed, it provides analog and digital inputs, more RS232 ports, a AOA sensor and few additional items. Call it a "mini" iBox if you will.
The "Lite" is a stand-alone system, unlike our normal iEFIS systems where you can have multiple, joined panels in a complex infrastructure.
"Lites" are straight forward to install and make great panels for owners of smaller aircraft who want a sophisticated EFIS but without the cost and complications of a large system.
A typical Lite system would be: The Discovery / Explorer / Challenger Lite panel, a RDAC for engine monitoring (if needed), perhaps a SP-6 compass. That's it. Add autopilot servos for an even greater overall deal...
The Discovery could be viewed as a direct replacement for our popular Enigma. It is similar in panel size but with a bigger, much higher resolution screen and of course is a powerhouse of functionality where needed.
MORE INFORMATION CLICK HERE
And DIMENSIONS CLICK HERE