All Prices include 20% vat (sales tax) - We ship worldwide - No vat charged outside the EU
Search Your Cart   Continue Shopping

MGL Avionics Servo


Email to a Friend
Add to Favorites
£ 875.00
Add to cart
MGL Avionics Servo
 

MGL Avionics Servo

The MGL Servo is a stepper motor based system providing a torque of up to 
4.8Nm (with shaft rotating).

The servo is not restricted to any particular range of the output arm movement
and can be used at any angle.

This servo is able to measure the external force acting on the output shaft for
use with trim indiction or automatic trim systems.

External control is either via a multi-drop RS232 link or a CAN interface at 250KBaud.

Multiple, threaded mounting points are available on the face and sides of the servo for ease of installation.

The MGL Servo can be used with the Enigma, Voyager and Odyssey EFIS systems. This servo will also be supported by the XTreme EFIS autopilot function.

For the Enigma, this servo is controlled through a RS232 serial port, either the built in RS232 port 1 or Port 4 on the COM extender. Only a single port is required to control multiple servos.
 
For the Voyager and Odyssey EFIS systems, this servo is controlled through the built in CAN interface and no COM Extender module is required.

 
 
 
The MGL Avionics EFIS systems contain a built-in autopilot. All you do is install the servos in the aircraft and the control and AP engage/disengage is handled directly by the EFIS using the keypad, or via a remote switch (and IOX). No other control modules are required.

 

 
The EFIS handles all autopilot controls. You can navigate using GPS track steering, course steering, with multiple Vertical Modes and many other functions using any of the navigation sources in, or connected to, your EFIS (internal GPS, external GPS, external nav radio, etc.). For £1596 (including vat) you have a full 2-axis autopilot. Or, if you simply want a roll-axis autopilot (‘wing leveler'), the cost will be around £798.
Price includes a fitting kit containing:
1 x Alu tube 30cm
1 x Rod end bearing RHT with fitting and nut
1 x Rod end bearing LHT with fitting and nut
4 x rivets
 
Please Click Here for the Servo Instalation manual
Please Click Here for the Autopilot Manual
 
For more details take a look at the MGL Avionics Website.
Please click HERE

Share

 
All prices on this website include UK vat (sales tax) at 20%. Customers outside the European Union will not be charged vat - it will be deducted at checkout. Vat registered customers inside the EU (excluding UK) will be supplied vat free - enter vat number at Checkout.
 
Telephone orders welcome. 0044 (0)28 9266 7187  - 9.00 - 5.00 Mon - Fri