COVID-19 We're still accepting orders but dispatch may be delayed by a day or two
All prices include 20% vat (sales tax) - We ship worldwide - No vat charged outside the EU
Search Your Cart   Continue Shopping

a.FF4 and MGL Flow Sender Special Offer

£ 344.00(393.27 €)
Add to cart
a.FF4 and MGL Flow Sender Special Offer

The FF-4 is a 2 1/4 sunlight readable colour display instrument intended for efficient monitoring of fuel related information for single or dual fuel tanks. The FF-4 has many display configurations based on single/dual flow senders, single/dual level senders and a fuel pressure sender.

Full functionality is available with a fuel flow and level sender or only with a fuel flow sender using calculated fuel levels based on fuel usage. Differential fuel flow calculations are also supported for fuel return systems. Fuel injector systems are also supported. Standard automotive fuel level senders can be used, even with odd shaped tanks due to a comprehensive, multi-point calibration system. Most fuel flow senders can be used as the K-factor of the sender can be entered into the system for simple calibration.

MGL Avionics supplies a lightweight dual range fuel flow sender that is ideally suited for the FF-4. Fuel flow senders from other manufactures (e.g. Red Cube) are equally suitable.

In addition, the FF-4 can use the actual ground speed from a RS232 NMEA enabled GPS receiver to determine fuel range.

The FF-4 can also be interfaced via the CAN bus to an external RDAC unit (Remote Data Acquisition Unit). This allows for easier installation as the RDAC unit is normally mounted in the engine compartment.

Manual can be downloaded HERE

 Some possible screen layouts.










MGL Flow Sender

Compatible with a wide range of fuels including those with alcohol/ethanol content.
Mechanical failure of the sender will not block the fuel flow.
The fuel flow sender is compatible with all of MGL Avionics range of products.
Successfully fitted to every possible engine type including large aero engines.
Install outside the engine compartment, in the cockpit or fuselage. Use metal Red Cube unit if you need to install a flow sender inside the engine compartment. This is best practice in case of an engine fire. 
MGL Avionics Flow Sender manual


All prices on this website include UK vat (sales tax) at 20%. Customers outside the European Union will not be charged vat - it will be deducted at checkout. Vat registered customers inside the EU (excluding UK) will be supplied vat free - enter vat number at Checkout.
Telephone orders welcome. 0044 (0)28 9266 7187  - 9.00 - 5.00 Mon - Fri